pin diode switch element rev. v1 1 1 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 1 mest2gfc - 010 - 25 features ? supports up to 10 w power ? low insertion loss: 0.4 db up to 40 ghz ? high isolation: 12 db @ 10 ghz ? rohs* compliant description a broadband medium power series switch element in chip form (26 x 12 mils). this is an electrical series device with a direct thermal path to ground (est2g). it can be used in place of beam lead devices for medium power (up to 10 watts) series switching. it is well suited for other applications from 100 mhz up to 40 ghz * restrictions on hazardous substances, european union directive 2011/65/eu. electrical specifications: t c = +25c ( unless otherwise specified) parameter units min. typ. max. test conditions breakdown voltage (v br ) v 100 i r = 10 a lifetime (t) ns 85 i f = 10 ma, i r = 6 ma, 10% / 50% i - region (w) m 8 i - layer series resistance (r s ) 2 i f = 100 ma, 500 mhz junction capacitance (c j ) pf 0.04 v r = - 10 v, 1 mhz insertion loss (i l ) db +0.3 - 0.4 +0.4 i f = 50 ma, 10 ghz i f = 50 ma, <40 ghz input return loss (ir l ) db 25 28 15 i f = 50 ma, 10 ghz i f = 50 ma, <40 ghz isolation (i so ) db 10 15 12 18 v r = - 10 v, 10 ghz v r = - 10 v, <6 ghz
pin diode switch element rev. v1 2 2 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 2 mest2gfc - 010 - 25 absolute maximum ratings 1,2 parameter absolute maximum breakdown voltage (v r ) 100 v forward current (i fdc ) 100 ma theta ( jc ) 60c/w junction temperature (t j ) 175c storage temperature (t stg ) - 65c to +250c mounting temperature (t mtg ) +320c per 5 sec. max. 1. exceeding any one or combination of these limits may cause permanent damage to this device. 2. macom does not recommend sustained operation near these survivability limits. handling procedures please observe the following precautions to avoid damage: static sensitivity these electronic devices are sensitive to electrostatic discharge (esd) and can be damaged by static electricity. proper esd control techniques should be used when handling these class 0 (hbm) devices. insertion loss isolation input return loss typical performance curves: t a = 25c, z o = 50 , small signal
pin diode switch element rev. v1 3 3 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 3 mest2gfc - 010 - 25 die outline junction temperature vs. p in (mounted on heat sink @ t a = +25c, 1.3 ghz) resistance vs. current, 500 mhz
pin diode switch element rev. v1 4 4 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support 4 mest2gfc - 010 - 25 m/a - com technology solutions inc. all rights reserved. information in this document is provided in connection with m/a - com technology solutions inc ("macom") products. these materials are provided by macom as a service to its customers and may be used for informational purposes only. except as provided in macom's terms and conditions of sale for such products or in any separate agreement related to this document, macom assumes no liability whatsoever. macom assumes no responsibility for errors or omissions in these materials. macom may make changes to specifications and product descriptions at any time, without notice. macom makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. no license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. these materials are provided "as is" without warranty of any kind, either express or implied, relating to sale and/or use of macom products including liability or warranties relating to fitness for a particular purpose, consequential or incidental damages, merchantability, or infringement of any patent, copyright or other intellectual property right. macom further does not warrant the accuracy or completeness of the information, text, graphics or other items contained within these materials. macom shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. macom products are not intended for use in medical, lifesaving or life sustaining applications. macom customers using or selling macom products for use in such applications do so at their own risk and agree to fully indemnify macom for any damages resulting from such improper use or sale.
|
